Lift Kit 3 " Revtec brand
- This topic has 4 replies, 4 voices, and was last updated 11 years, 11 months ago by Sheba.
-
AuthorPosts
-
Hi
Wanted to install the lift kit, as mentioned in the above mentioned subject, Revtec brand is costing Dhs 1800 with installation.
Awaiting your feedback on the above.
Spacer Kit
has the following
1. 2 front shocks
2. 4 spacers
3. 1 qd kit
4. track bar
5. relocation bar – not sure what this is.Regards
Salam
0503651138Hi Salam
As you a 2012 wrangler would suggest to wait for a while till you do more off-roading and know your wrangler more, jeeps can do miracles on stock, once you have come up to the stage of extreme offroading then think of going for liftkit & more of modifications.
I drive a 1993 wrangler with a 2.5″ Rugged Ridge lift kit and lots of other stuff spent to keep it going on. ( Just Empty Every Penny)
Trust me jeep can go anywhere without any liftkit or mods. Its the driver skills and not the machine which works in deserts. Master the skills and you can even climb high dunes with a 1.6 ltr vitara which I have seen personally.
As for the Revtek Susspension kits you have mentioned is not coming with coil springs its just kind of body lift.
quote Amjed:Hi SalamAs you a 2012 wrangler would suggest to wait for a while till you do more off-roading and know your wrangler more, jeeps can do miracles on stock, once you have come up to the stage of extreme offroading then think of going for liftkit & more of modifications.
I drive a 1993 wrangler with a 2.5″ Rugged Ridge lift kit and lots of other stuff spent to keep it going on. ( Just Empty Every Penny)
Trust me jeep can go anywhere without any liftkit or mods. Its the driver skills and not the machine which works in deserts. Master the skills and you can even climb high dunes with a 1.6 ltr vitara which I have seen personally.
As for the Revtek Susspension kits you have mentioned is not coming with coil springs its just kind of body lift.
Wonderful advise…. an experienced hand can only give this informations…
๐ ๐ ๐
-
AuthorPosts
- You must be logged in to reply to this topic.