[Giannis]

Giannis

March 11, 2017 at 11:42 am #2750

Good day Team,

On my last drive with DO I had some radio issues. Abdulah was kind enough to lend me a radio :thanks: , and both drives were completed as supposed to.

However what was wrong with my UHF? 😕
I do remember playing with it, pressing buttons, looking for functionalities. So it was my fingers that probably caused the issue. =((
I went back home, and looked for the manual…… oups! Looks like the cleaning lady threw my instructions away!!!!

So yesterday I drove down to Dragon Mart. Found the very helpful guy who sold me my UHF, did his magic and wham… all back to normal. 😀

So here is the clearance procedure, in case some cause the same or similar issue (may also be working with other crony UHF’s). #:-s

1. Turn your radio ON
2. Press the exit (EXIT) button.
3. While holding the EXIT button switch the UHF OFF.
4. While holding the EXIT button switch the UHF ON.
5. You should see the CLR indication flashing on the screen.
6. Release the exit button.

After that the radio should be fully functional.

See attached pictures for reference.

Safe dune bashing all!

---

Attachments:

[Author]

Posts