[Gregpru]

Gregpru

May 29, 2016 at 11:39 am #35946

Crony CY 888 channel programming guide.

Someone asked for this last weekend so here it is.

Enter the frequency for channel 1 physically as 462.562 The 5 will come automatically per the program inside.

Then press Funtion “F” and press “#” for storing and then select channel “01” using “A” for up and “B” for down. and then press “D” for storing launch frequency (speak).

Then press F and press # and then press “C” for storing receive frequency (hear). The channels for speak and hear are they same for off-road purpose. Channel 1 is now set.

To confirm Press F and press 1. You will see CH – 01 on the screen.

Press F and 1 again. You will now see the frequency 462.562 5 and 01 on the screen.

Repeat For Channel 2 and subsequent channels up to 14.

1—————- 462.5625
2—————- 462.5875
3—————- 462.6125
4—————- 462.6375
5—————- 462.6625
6—————- 462.6875
7—————- 462.7125
8—————- 467.5625
9—————- 467.5875
10————— 467.6125
11————— 467.6375
12————— 467.6625
13————— 467.6875
14————— 467.7125

[Gregpru]

Gregpru

May 26, 2016 at 3:44 am #35920

@Sebastien I will bring a spare radio just in case 🙂

[Author]

Posts