[marsterra]

marsterra

January 2, 2016 at 7:07 pm #34578

This should help those members who have Radio were we have to manually set frequencies like my ICOM IC-V87.

As an example if you want to set Channel 3, than follow the steps as given below.

1: Press ‪#‎V‬/M Key (second row last button) to toggle between Frequency & Channel mode, Select channel mode
3: Type 4 6 2 6 1 2 – This will automatically pick up 462.612 5
4: Press Function Key (orange button on top right corner)
5: Press * Key (channel number will start blinking, type 003 or use arrow keys to select Channel 3)
6: Press Function Key (orange button on top right corner) to Save Frequency on channel number 3
7: By Default all channels are stored with ‘L’ low power

This way you can set all 22 channels

To change channel power to High or Low

1: Press #V/M Key (second row last button) to toggle between Frequency & Channel mode, Select channel mode
2: Press Function Key (orange button on top right corner)
3: Press #V/M Key (second row last button) will select high or low depending what was the current power for the particular channel
4: Power setting for channel will saved in step 3, to change power setting for channel repeat step 1&2

[Author]

Posts